Surge Generator T-1032(15)

 

 
DOWNLOAD
PREVIOUS
Suitable for fault location in medium high voltage cables.
High voltage testing up to 32 KVDC.
Up to 200mA maximum Burning Capability.
1500 JOULES Energy on 8, 16,32KV Range.
Built in ICM & Decay Coupler for Reflectometer T-510.
Suitable as thumper required for pinpointing of fault.
Compact design.
Suitable to operate on mains (220-230/240 VAC, 45Hz up to 60 Hz) or portable generator.

DESCRIPTION

  • Instrument has been primarily designed to produce high voltage surges for pre-location of under ground cable fault in combination with Reflectometer T-510.

  • The surges produced help in pinpointing the fault and tracing the route of the cable when used with acoustic DIGIPOINT surge generator generates D.C. high voltage for pressure testing of the underground cables to find out faulty phase and the breakdown voltage with leakage current.

  • It can also be used as limited burn down instrument.

TECHNICAL SPECIFICATIONS

Physical
Dimension
52 X 55 X 80 cm3
Weight
135 kg approx.
General
Supply Voltage
220-230/240 VAC, 45Hz up to 60 Hz.
Output
Voltage Range
Short Circuit Current
I
0- 8 KV.
200 mA.
II
0- 16 KV.
80 mA.
III
0- 32 KV.
35 mA.
Maximum Surge Energy
1500 JOULES on each range.
Surge Sequence
Manual / Auto (3 to 15 Sec).
Operation Condition
Operating Temperature
-10°C to 50°C.
Storage Temperature
-10°C to 60°C.
Protection
Standard Accessories
Zero Start Interlock.
High Voltage output cable -25 mts.
Range Interlock.
L.T. cable - 15 mts.
Automatic Discharge.
Earthing cable- 15 mts
Over Load Protection.
Discharge Rod.
Thermal breakdown Protection.
Discharge Rod lead- 5mts.
Over current Protection.

Note: Dimension and Weight are subject to change without compromising on the safety and electrical specifications.



SURGE GENERATOR SET

PRE-LOCATION SET

PINPOINTING SET

CABLE IDENTIFICATION SET

CIS

CABLE ROUTE TRACER

DC HIGH VOLTAGE SET